The rubber granulate tile consists of ground rubber and polyurethane. The distribution of the grain sizes in the ground rubber is exactly specified; the fine-grained and explicitly structured surfaces can be design in this way. While pressing, the permanently elastic binder polyurethane binds the single granules strongly together.
The rubber granulate tile is elastic, so it can partly adapt to the base course. It damps impact noise and vibrations. Depending on the thickness and density, it can be well or hardly water-permeable.
Discount:
- 58,30 € / 0,50 Set / item
- (2 piece / Set7,50 kg / piece)
-
Realisation time approx.
3-4 weeks
Properties
Colour
material The coloured rubber granulate of the wear layer is a newly manufactured, fully colourful EPDM (Ethylene Propylene Diene Monomer) with the edge length from 0.5 to 4 mm. The bottom layer of the two-layered, but monolithically (from one piece) manufactured tile is made of a newly manufactured, but black EPDM. Thanks to the use of 100% new EPDM in the product, the best fire safety level and the minimum of pollutant load are achieved.
Characteristics
Colourfast and UV resistant
Material and colour are resistant against UV radiation during weathering in a long-term perspective.
Hygienically harmless for humans and animals
No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).
Just paste it on
Paste on an appropriate base course with WARCO PU glue at some points or on entire surface.
Weatherproof - indoors and outdoors
Recommended for areas in buildings and in the open air. Avoid waterlogging and assure the water outlet.
Low-flammable (cfl-s1)
Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.
Suitable for chlorinated water
Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.